ISO/TS 20065:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 19 ديسمبر 2022 ·

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

الضجيج وتأثيره على الإنسان
* يشمل قياس السمع * واقيات الأذن، انظر 13.340.20 * الصوتيات والقياسات الصوتية، انظر 17.140

ملفات الوثيقة ISO/TS 20065:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO/TS 20065:2022

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO/IEC 4879:2024
 
مواصفة قياسية دولية
Information technology — Quantum computing — Vocabulary
ISO 16502-1:2024
 
مواصفة قياسية دولية
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette
ISO 13680:2024
 
مواصفة قياسية دولية
Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
ISO 17097:2024
 
مواصفة قياسية دولية
3-D human body scan data — Methods for the processing of human body scan data